|
SureLoc
|
Weldfit 's Pipeline Products
|
SureLoc Tee
|
Weldfit 's patented SureLoc product line reduces fabrication stress
risers, can accomodate line stop cutters, and are designed ASME B16.5 and B16.47 standards.
|
|
SureLoc
|
SureLoc Tee
|
Weldfit 's SureLoc Tee and SureTap Tee provides full radiography,
chamfered ends which meet code requirements, and can be provided in reducing sizes.
|
|
|
|
|
SureTee
|
SureTee
|
SureSleeve
|
SureSleeve
|
Weldfit 's SureTee's provide sizes from 2-36 NPS with classes ranging
from 150-600, sleeve lengths from 6-60 inches, and designed in either ASME B31.3 or ASME B31.4/8 specifications.
|
|
|
|
Weldfit 's SureSleeve pipe repair sleeves are custom designed for each
application to meet requrements of ASME B31.3, B31.4, or B31.8 piping codes or US Department of Transportation
Regulations.
|
|
|
SureLoc Flange
|
SureLoc Flange
|
SureLoc Blind Plugs
|
SureLoc Blind Plugs
|
Weldfit 's SureLoc Flanges are manufactured from ASTM A105N materials
with a pipeline hub of sufficient thickness to meet the design requrements of ASME B31.4 & 8 for .72 design factor
|
|
|
|
Weldfit 's SureLoc Blind Plugs are designed with or without the scarfed
nipple. Check valve and o-ring are provided as standard equipment.
|
|
|
SureLoc Guide Bar Plugs
|
SureLoc Guide Bar Plugs
|
Purge Fittings
|
Purge Fittings
|
Weldfit 's Guide Bar Plugs are provided with scraper bars in
configurations according to installation. Configurations may be limited by the necessity of the plugging adapter
assembly.
|
|
|
|
Weldfit 's Purge and Equalization Fittings provide a standard o-ring of
Nitrile (Buna-N) 70 durometer hardness. Nipple material on standard fittings is ASTM A333 Grade6.
|
|
|
Plug & Cutter Holders
|
Plug & Cutter Holders
|
Plug & Cutter Housings
|
Plug & Cutter Housings
|
Weldfit 's Plug and Cutter Holders are manufactured in various NPS sizes
and according to machine ranges. Typical NPS sizes range from 3-36.
|
|
|
|
Weldfit 's Cutter/Plug Housings are manufactured in ASME/ANSI 125#,
150#, 300#, 600#, 900#, 1500#, and 2500#. They are designed to our clients choice of facing and bolting arrangement.
|
|
|
Adapter Flanges
|
Adapter Flanges
|
Pig Passage Indicator
|
Pig Passage Indicator
|
Weldfit 's Adapter Flanges are custom designed for matching intermediate
sizes, flange facings, or ratings using exiting bell housing adaptors.
|
|
|
|
Weldfit 's Sure-Sig Pig Passage Indicators are provided in either standard
uni-directional or standard bi-directional models. Clients can chose from either manual or visual application.
|
|
