|
Block Forged
|
Weldfit 's Oilfield Products
|
API Flanges
|
Weldfit 's API Size Block Forged Tees, Crosses, and Elbows can be
supplied in a wide range of materials. These fittings combine the strength of a forging and the precision of a
machined product.
|
|
Block Forged
|
API Flanges
|
Weldfit 's API type 6A flanges are of the ring joint type. Entrance
bevels, counterbores or recesses to receive casing and tubing hangers can be designed when used as end connections
on casing and tubing heads.
|
|
|
|
|
Studded Adapters
|
Studded Adapters
|
API 16A Clamps
|
API 16A Clamps
|
Weldfit 's Studded Adapters are manufactured from API 60/90 materials,
with or without corrosion resistant overlays, and in various sizes. ASTM A193 B7 studs and ASTM A194 2H nuts are
provided as standard.
|
|
|
|
Weldfit 's API Hub clamps are designed to industry standards and
fully comply with the requirements of API 16A.
|
|
|
API Hubs
|
API Hubs
|
Studded Crosses & Tees
|
Studded Crosses & Tees
|
Weldfit 's hubs are manufactured from materials as designated in
Table 14 of API 16A for the rated working pressure of the fitting unless otherwise specified by the purchaser.
Hardness levels comply with paragraph 7.5.1.3 of API 16A.
|
|
|
|
Weldfit 's studded crosses and tees are manufactured to the following
specs. Exceptions include oversize entrance bores of 3 3/16 in and 4 1/4 in. with tolerance of +0.03 in -0.0 in are
allowable for 3 1/8 in and 4 1/16 in.
|
|
|
Drilling Spools
|
Adapter & Drilling Spools
|
Choke & Kill Manifolds
|
Choke & Kill
|
Weldfit 's Drilling Spools can be supplied in all standard API 16A
sizes and types with any combination of flange or hub sizes, materials grades, pressure rating, and PSL Level.
|
|
|
|
Weldfit 's Choke and Kill manifolds are manufactured to meet specific
operation demands in onshore / offshore applications.
|
|
Cement
|
Cement Manifolds
|
Standpipe Manifolds
|
Standpipe
|
Weldfit 's Cement Manifolds with pressure ratings to 20,000 psi.
are designed and assembled in compliance with API or ASME B31.3 rules.
|
|
|
|
Weldfit 's Standpipe Manifolds are manufactured with the 2,000 and
7,500 psi range. They can be designed as either single or dual with forged or long sweep fittings.
|
|
|
|
Pumproom Manifolds
|
Pumproom
|
|
Weldfit 's Pumproom and Distribution Manifolds are utilized at the
well site. They are designed to meet demanding field operations.
|
|
